Heater Specifications

AerOrod® Heater Specifications

Standard BXX AerOrod Heaters
Part Number Diameter Power at 115 Volts Watt Density at 230 Volts Power at 230 Volts Watt Density at 230 Volts Heated Length (L1) Un-Heated Length (L2)
(inches) (watts) (w/in²) (watts) (w/in²) (inches) (inches)
BXX04B46-4K 0.040 115 20 — — 46 4
BXX06B41-4K 0.062 300 38 — — 41 4
BXX06B31-4T 0.062 400 66 — — 31 4
BXX06B24-4T 0.062 500 107 — — 24 4
BXX09B88-4T 0.093 300 12 1200 47 88 4
BXX09B53-4T 0.093 500 32 2000 129 53 4
BXX09B38-4T 0.093 700 63 — — 38 4
BXX09B29-4T 0.093 900 106 — — 29 4
BXX13B83-4T 0.125 600 18 2400 74 83 4
BXX13B62-4T 0.125 800 33 — — 62 4
BXX13B50-4T 0.125 1000 51 — — 50 4
BXX13B33-4T 0.125 1500 116 — — 33 4
BXX19B94-5T 0.188 1200 22 4800 86 94 5
BXX19B76-5T 0.188 1500 33 — — 76 5
BXX19B57-5T 0.188 2000 59 — — 57 5
BXX19B45-5T 0.188 2500 94 — — 45 5
BXX25B126-5T 0.250 1800 18 7200 73 126 5
BXX25B113-5T 0.250 2000 23 — — 113 5
BXX25B91-5T 0.250 2500 35 — — 91 5
BXX25B65-5T 0.250 3500 69 — — 65 5

  

Notes:  Apply to all BXX heaters

  1. For power at other voltages, multiply power at 115V by (new voltage/115)².
  2. Tolerance on wattages is ± 10%.
  3. Tolerance on diameter D1 is ± 0.005 inch.
  4. Tolerance on heated length (L1) is ± 5%.
  5. Tolerance on cold length (L2) is ± 1 inch.
  6. Sheath material is Inconel 600 unless otherwise specified.
  7. Wire material is nickel-chrome iron with resistivity of 620 ohms – cmf at 68 ºF (20 °C).
  8. These heaters can be coiled or formed to meet your requirements.  Please consult with your requirements.
  9. The standard cold lead length are 4 or 5 inches, for our stock heaters.
  10. Cold lead wire material is nickel internally spliced to the heater wires.

 

BXX Heater Specifications
Diameter ± 0.005″ 0.040″ 0.063″ 0.093″ 0.125″ 0.188″ 0.250″
Ohms/Ft ± 10% 30.0 13.0 6.0 3.2 1.4 0.7
Sheath Diameter (inches) — 1/16″ 3/32″ 1/8″ 3/16″ 1/4″
Sheath Diameter (millimeters) 1.0 1.6 2.4 3.2 4.8 6.4
Maximum Voltage 120 120 230 240 350 450
Maximum Current (amps) 2 4 7 9 17 23
Maximum Hi-Pot Voltage (vac) 250 350 500 750 1100 1500
BXX Standard Max. L1 (inches) 47 120 120 120 133 149
BXX Watt Density “K” Max. (w/in²) 80 65 55 40 25 25
BXX Watt Density “T” Max. (w/in²) 100 150 150 140 100 100
“K” Termination Lead Wire (AWG) 18 18 18 18 18 12
“T” Termination Lead Wire (AWG) 18 18 18 18 18 12
 Wire Diameter Approximately (inches) 0.006 0.010 0.015 0.020 0.032 0.040

 

Standard BXD AerOrod Heaters
Part Number Diameter Power at 115 Volts Watt Density at 230 Volts Power at 230 Volts Watt Density at 230 Volts Heated Length (L1)
(inches) (watts) (w/in²) (watts) (w/in²) (inches)
BXD04B-71K 0.040 75 8 — — 71
BXD04B-53K 0.040 100 15 — — 53
BXD04B-35K 0.040 150 34 — — 35
BXD06B-61K 0.062 200 17 — — 61
BXD06B-41T 0.062 300 38 — — 41
BXD06B-31T 0.062 400 66 — — 31
BXD09B-88T 0.093 300 12 1200 46 88
BXD09B-53T 0.093 500 32 — — 53
BXD09B-38T 0.093 700 63 — — 38
BXD13B-83T 0.125 600 18 2400 73 83
BXD13B-62T 0.125 800 33 — — 62
BXD13B-50T 0.125 1000 51 — — 50
BXD19B-126T 0.188 900 12 3600 48 126
BXD19B-94T 0.188 1200 22 — — 94
BXD19B-76T 0.188 1500 33 — — 76

 

Notes:  Apply to all BXD Heaters

  1. For power at other voltages, multiply power at 115V by (new voltage/115)².
  2. Tolerance on wattages is ± 10%.
  3. Tolerance on diameter D1 is ± 0.005 inch.
  4. Tolerance on heated length (L1) is ± 5%.
  5. Sheath material is Inconel 600 unless otherwise specified.
  6. Wire material is nickel-chrome iron with resistivity of 620 ohms – cmf at 68 ºF (20 °C).
  7. These heaters can be coiled or formed to meet your requirements.  Please consult with your requirements.